Mobile Two Way Radio

Two way Mobile radio or mobiles refer to wireless communications systems and devices which are based on radio frequencies, and where the path of communications is movable on either end. A sales person or radio repair shop would understand the word mobile to mean vehicle-mounted: a transmitter-receiver (transceiver) used for radio communications from a vehicle. Mobile radios are mounted to a motor vehicle usually with the microphone and control panel in reach of the driver.Early Two way mobile radios used amplitude modulation (AM) to convey intelligence through the communications channel. In time, problems with sources of electrical noise showed that frequency modulation (FM) was superior for its ability to cope with vehicle ignition and power line noise.

The frequency range used by most early radio systems, 25 to 50 MHz (vhf "low band") is particularly susceptible to the problem of electrical noise. This plus the need for more channels led to the eventual expansion of two-way radio communications into the VHF "high band" (150 to 174 MHz) and UHF (450 to 470 MHz). The UHF band has since been expanded again. One of the major challenges in early mobile radio technology was that of converting the six or twelve volt power supply of the vehicle to the high voltage needed to operate the vacuum tubes in the radio. Early tube-type radios used dynamotors - essentially a six or twelve volt motor that turned a generator to provide the high voltages required by the vacuum tubes. Some early mobile radios were the size of a suitcase or had separate boxes for the transmitter and receiver. As time went on, power supply technology evolved to use first electromechanical vibrators, then solid-state power supplies to provide high voltage for the vacuum tubes. These circuits, called "inverters", changed the 6V or 12V direct current (DC) to alternating current (AC) which could be passed through a transformer to make high voltage.

Now Two way radio (mobile) is with Custom design for a particular customer is a thing of the past. Modern mobile radio equipment is "feature rich". A mobile radio may have 100 or more channels, be microprocessor controlled and have built-in options such as unit ID. A computer and software is typically required to program the features and channels of the mobile radio. Menus of options may be several levels deep and offer a complicated array of possibilities. Some mobile radios have alphanumeric displays that translate channel numbers (F1, F2) to a phrase more meaningful to the user,and are now designed with a myriad of features to preclude the need for custom design. Finds Best Mobile two way Radio